Send Email
Send SMS

S. L. Paper Machines LLPS. L. Paper Machines LLP
Send Email
Send SMS


Home » Products » Paper Machine Press Section

Paper Machine Press Section

The main function of the Paper Machine Press section is to continue to remove water from the pulp fibers and to smooth the surface characteristics of the felt and wire sides (top and bottom sides) of the paper web running the length of the machine. The dewatering is carried out by a mechanical pressing of the paper layer against properly selected felts. The simplest construction of a pressing nip consists of two rotating rolls with the paper-felt sandwich transported between them at high speed. During the pressing of the paper layer against the felts, water is squeezed out of the paper and enters the felts. So the water content of the paper decreases to about 48-50% after the pressing section.

We manufacture following various types of Press Rolls having different advantages.

1. Baby Press
2. Traditional / Inverse Press
3. Jumbo Press
4. Bi Nip / Tri Nip Press

Different Press Rolls are used according to the application and requirement.
Paper Machine Press Section

Traditional / Inverse Press for Paper Machine

Traditional / Inverse Press for Paper Machine

Conventional roll presses are configured with one of the press rolls is in a fixed position, with a mating roll being loaded against this fixed roll. The felts run through the nips of the press rolls and continues around a felt run, normally consisting of several felt rolls. During the dwell time in the nip, the moisture from the sheet is transferred to the press felt. When the press felt exits the nip and continues around, a vacuum box known as an Uhle Box applies vacuum to the press felt to remove the moisture so that when the felt returns to the nip on the next cycle, it does not add moisture to the sheet.

For kraft duplex paper

  • Pressure : up to 200kg/cm

  • Roll dia : up to 850mm


We also manufacture Bi Nip & Trip Nip Press section which internals are constructed from SS 304 and Sturdy MS framing with loading levers. It is designed to maximise water removal, whilst efficiently transferring the web from the forming section the the dry part and increasing the quality of the paper.

  • Increase efficiency and less paper breaks
  • Improves product quality in terms of strength and surface properties
  • reduces steam usage
  • increase production quality


Paper Mill Size Press

For Duplex And Higher Gsm Kraft Paper
  • ROLLDIA    : Up to 900mm
  • Operation : Pneumatic or Hydraulic

  • For Pigmentation of starch and chemicals.

  • Size press is to apply a solution of starch/glue/colour to dry paper.

  • Improves the mechanical and printing features of the sheet.

  • Inclined design of size press can lessen paper break.

  • Easy & convenient operation



Paper Mill Size Press

Paper Mill Baby Press

Paper Mill Baby Press

For Duplex and Higher GSM Kraft Paper.
    • PRESSURE : Up to 40kg/cm

    • ROLL DIA   : Up to 450mm.




    S. L. Paper Machines LLP
    Devang Shah (Director)
    317-318, Pushpam Complex, Opposite Seema Hall, 100 Feet Road, Satellite
    Ahmedabad - 380015, Gujarat, India

    Contact via E-mail

    Contact via SMS

    Home  |  Profile  |  Products  |  Site Map  |  Contact Us  |   Mobile Site

    Member © S. L. Paper Machines LLP. All Rights Reserved (Terms of Use)
    Developed and Managed by IndiaMART InterMESH Limited