|Automation Grade||Automatic |
|Input Voltage||380 V/ 50 Hz|
|Brand/Make||S. L. Paper|
This Machine can produce variety of Duplex Paper & Boards including below types. White Liner Chipboard
White Liner Chipboard is a grade of Paperboard which is typically made from Layers of Waste Paper, White Un-Used Paper, Recycle Fibers and Thin Layers of Virgin Pulp Sheet as well sometimes.
The first Layer is White, which is made from bleached chemical wood Pulp, goes on the outside of the carton and carries the printing
The various Grey Layers are composed of waste paper. The second layer or underline may also comprise bleached chemicals pulp or mechanical pulp.
The reverse side layer can be made from specially selected recycled pulp or may be white through the use of bleached chemical pulp. There are additional grades of unlined chipboards with coloured (dyed) liner plies.Test Liner Board
Test Liners are grades of Paper Board made from Recycle Paper. It is widely used for production of corrugated boards. A typical Carton box consists of layers of linerboard and one layer of medium. They have excellent strength properties including tensile, burst, compression as well as reduced roughness to aid superior print-ability and good water resistance.
There are several variants of Testliners :
Type 1 : It has the best bursting strength and ring crush values with as high as 560 Kpa for 200 gsm
board. It has stable & sustained strength properties also under varying climate conditions.
Type 2 : It also has high burst stength values but not as strong as Test Liner type 1. With values up to
510Kpa and span compression test of up to 3.75KN/m2 for a 200 GSM Board
Type 3 : It has burst strength values up to 470Kpa and span compression test up to 3.45 kN/m2 for a
200 GSM Board.
Type 4 : It has burst strength values up to 330 Kpa and span compression test of up to 2.55kN/m2 for
a 200 GSM Board.