|Brand/Make||S. L . Paper|
|Input Voltage||380 V/ 50 Hz|
The function of the pulper is to gently slush the recycled paper raw material into a pumpable pulp, suitable for processing in stock preparation whilst facilitating the efficient removal of contaminants from the pulp.
The design of the pulping and detrashing equipment must therefore satisfy a number of process requirements:
Slush down the recycled paper to individual fibres, avoiding fibre damage and minimize fragmentation of contaminants to enable efficient removal in the downstream cleaning and screening processes.An efficient detrashing system for removing contaminants in the first stage of the stock preparation process.
To meet these process requirements, a number of pulping and detrashing systems have been developed and are successfully in operation.
Pulper is made up of a cylinder shaped recepient, which has a propeller in the bottom part, which shakes up the sheets of Pulp that are placed in it. By means of the continuous rubbing of the pulp against the propeller, the fibers which form the bundle of pulp are separated, leaving a suspension in the water with a cosistency as per the requirement.
When the sheet is broken down, the pulper is emptied and the pulp passes through a grating which does not allow the passage of large fragments which have been insufficiently broken down. The pulp is deposited in a vat or drum for its subsequent use.
To meet these process requirements, a number of pulping and detrashing systems have been developed and are successfully in operation. We manufacture following differet types of Pulpers for different applications.
1. ATS Pulper
2. Hydra Pulper
3. D Type Hydra Pulper
4. Hi Con Pulper
5. UM / Broke Pulper
Each Pulper has its own speciality and according to require percetnage of consistency we select appropriate Pulper for the Paper Mill.